All Mobile Phone Flash And Unlock Here:All Mobile Unlock (imei service), iPhone, Samsung, HTC, Nokia (LBF and Lumia imei Service) etc. Device and online Credit Sales iphone, HTC, Blackberry, Nokia, Samsung, Sony Ericsson, Huawei, Symphony, Walton, Lava, Lenovo, Micromax, Maximus, Lephone, G'phone, Forme, Kingstar, Kingtel, Smart, Myphone, Mycell, Octenn, Peace, Karbon, Winmax, Wootel, Xksstel, yestel, yxtel, Tinmo All MOBILE LATEST FACTORY FIRMWARE/STOK ROM/OFFICIAL FIRMWARE/PAC FILE AVAILABLE Here Contact Now **Nity Mobile And Computer** Thakurgaa,Bangladesh Contact Number :-+8801729520220 Email-mithunbasak49@yahoo.com. Email-mithunbasak49@yahoo.com , Nity Mobile **Nity Mobile And Computer** Thakurgaa,Bangladesh Contact Number :+8801729520220 All Mobile Unlock (imei service), iPhone, Samsung, HTC, Nokia (LBF and Lumia imei Service) etc. Device and online Credit Sales iphone, HTC, Blackberry, Nokia, Samsung, Sony Ericsson, Huawei, Lava, Lenovo, Micromax, cuntrry lock unlock AVAILABLE Here +8801723079471 +8801738515367

Sunday, February 24, 2019

Tinmo F588 Flash File MT6580

Tinmo F588 Flash File
MT6580__lmkj__F588__F588__5.1__ALPS.L1.MP6.V2_AEON6580.WEG.L_P73
Tinmo F588 Flash File MT6580
Tinmo F588 Flash File Dead Boot Recover Frp Remove  Flash File

Wait for phone...
Phone found! [ 11 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 11010030303447393051471E999441C7
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 11010030303447393051471E999441C7
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0x9ACC3B46FE1553738A30574D54EB56A4
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : lmkj
ProdName  : F588
ProdModel : F588
Device    : F588
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_AEON6580.WEG.L_P73

[Read Ok] : preloader_aeon6580_weg_l_l200.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / aeon6580_weg_l_l200 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1295 MiB
Scatter saved to : C:\Users\Nity Mobile\Desktop\MT6580__lmkj__F588__F588__5.1__ALPS.L1.MP6.V2_AEON6580.WEG.L_P73\

All done!

Done!
Elapsed: 00:06:15
Reconnect Power/Cable!

Saturday, February 9, 2019

Tinmo F688 Dead Boot Recovery Frp Remove Flash File MT6580

Tinmo F688 Flash File
Tinmo F688 Flash File Cm2 Read File
Tinmo F688 Boot Recover Frp Remove  Flash File
MT6580__Tinmo__U2__Tinmo__6.0__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2



Wait for phone...
Phone found! [ 11 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 110100303034474530018DD0E3825287
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 0EG40
[eMMC] : FLASH_CID : 110100303034474530018DD0E3825287
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0x9ACC3B4688A01BAE5B57989A87A045B1
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : Tinmo
ProdName  : F688
ProdModel : U2
Device    : Tinmo
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

[Read Ok] : preloader_yuanda6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / yuanda6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1332 MiB
Scatter saved to : C:\Users\Nity Mobile\Desktop\MT6580__Tinmo__U2__Tinmo__6.0__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2\

All done!

Done!
Elapsed: 00:07:01
Reconnect Power/Cable!



ITEL IT1513 Flash File cm2 Read

ITEL IT1513 Flash File cm2 Read
ITEL IT1513 Dead Boot Recover Frp Remove Flash File
ITEL_IT1513_itel_it1513_6.0_MRA58K_release-keys_itel_it1513


- > Wait phone connected ... 

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : itel_it1513
Model Brand : Itel
Model Device: itel_it1513
AndrVersion : 6.0
BaseBand CPU: ITEL_IT1513
Project Ver : MRA58K release-keys
Model Ext   : itel it1513

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2674 MiB
Saved to : C:\Users\Nity Mobile\Desktop\ITEL_IT1513_itel_it1513_6.0_MRA58K_release-keys_itel_it1513\
Done!

Elapsed: 00:16:03

Reconnect Power/Cable!


Friday, February 8, 2019

Maximus P7 Frp Remove Flash File

Maximus P7 Frp Remove Flash File


 Maximus P7 Frp Remove Dead Boot Recover Flash File

MT6739__Maximus__P7__8.1.0__GP_MAXIMUS_BD_P7_V09_20181116__O11019__Android
Maximus P7 Frp Remove Dead Boot Recover Flash File Link
Maximus P7 Frp Remove Cm2 Boot File Link


1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM11)
MODE : PRELOADER PORT
PORT : 11
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : Wiko : SEC_6739 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : DA_PL.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]

        EMMC: 11010030303847373000FAAE34E63251
        EMMC: VEN : TOSHIBA | OEM : 01 | DEV : 008G70
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x1D2000000 [ 7.28 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : F569BF17512C09593057BC1632F22140

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : GP_MAXIMUS_BD_P7_V09_20181116
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-10-05
Build Time     : 1542342733
Product Model  : P7
Product Brand  : Maximus
Product Name   : P7
Product Device : P7
Product Board  : P7
Product Manfct : Maximus
Product Info   : Android
Product Board  : bird6739tv1_bsp_1g
Board Platform : mt6739

MT6739__Maximus__P7__8.1.0__GP_MAXIMUS_BD_P7_V09_20181116__O11019__Android

Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 33%
Read : system.img
ExtSparse : Compression ratio : 14%
Read : cache.img
Read : userdata.img

FW Size  : 1.57 GB
Android Info saved : _Android_info.txt
Scatter  : MT6739_Android_scatter.txt
Saved to : C:\Users\Nity Mobile\Desktop\MT6739__Maximus__P7__8.1.0__GP_MAXIMUS_BD_P7_V09_20181116__O11019__Android\

Done!
Elapsed: 00:06:01


Thursday, February 7, 2019

PEACE P4 Dead Boot Repair Flash File

PEACE P4 Dead Boot Repair Flash File

 MT6572_NAND_PEACE__P4__zmd12_tt_t23_p4_nd42_2k_b15__4.4.2__ALPS.KK1.MP7.Band1.2.5.V1.3


Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : PEACE
Device Model   : zmd12_tt_t23_p4_nd42_2k_b15
Device CPU     : MT6572
Device IntName : P4
Device Version : 4.4.2
Device Compile : 8/22/2018 2:54:06 AM
Device Project : ALPS.KK1.MP7.Band1.2.5.V1.3
Device ExtInfo : P4

Symphony V135 Frp Remove Flash File And Tools

Symphony V135 Frp Remove Flash File And Tools
MT6580__Symphony__V135__8.1.0__V135_HW1_V6__O11019__k80hd_bsp_fwv_512m

Symphony V135 Full Flash File Link
Symphony V135 Frp Remove File And Tools 50Mb Only Link
Symphony V135 Cm2 Boot File


Operation : Read Firmware [ v2.04 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BOOTROM
MODE : Symphony V135 : Symphony 135 BooT File | Manual : Disabled
Fail to disable Dog!
AGENT : Look for suitable BootChain in DA ... 
AGENT : DA_SWSEC_1640_V2610AN_SYM_BD_01.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 460001154D32364EB9600342F155CBAC
DAInf: 4 : 2 : 156
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 150100464E36324D420360B9ACCB55F1
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
INIT : 0xBC : LP/DDR3 [ 0x00000000 :  [ 0 B ] ]
DRAM : DRAM: 0x40000000 [ 1.00 GB ]
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: 150100464E36324D420360B9ACCB55F1
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FN62MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00080000 [ 512.00 KB ]
              USER   : 0x1D2000000 [ 7.28 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]

        CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : DBAD210BC77123EA85B0CE9C7CFA16C

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM Port (COM24)
MODE : PRELOADER PORT
PORT : 24

Boot done!

Patch Level    : O11019
Display ID     : V135_HW1_V6
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-05-05
Build Time     : 1529051757
Product Model  : V135
Product Brand  : Symphony
Product Name   : V135
Product Device : V135
Board Platform : mt6580
Product Manfct : Symphony
Product Info   : k80hd_bsp_fwv_512m
Product Board  : k80hd_bsp_fwv_512m
Board Platform : mt6580

MT6580__Symphony__V135__8.1.0__V135_HW1_V6__O11019__k80hd_bsp_fwv_512m


SecureDevice : Paired type!
-> INFO : That device WILL dead after ReadOut Flashing!

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : persist.img
ExtSparse : Compression ratio : 100%
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : odmdtbo.img
Read : vendor.img
ExtSparse : Compression ratio : 60%
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 33%
Read : cache.img
Read : userdata.img

FW Size  : 1.16 GB
Android Info saved : _Android_info.txt
Scatter  : MT6580_Android_scatter.txt
Saved to : C:\Users\Nity Mobile\Desktop\MT6580__Symphony__V135__8.1.0__V135_HW1_V6__O11019__k80hd_bsp_fwv_512m\

Done!
Elapsed: 00:08:39


Tuesday, January 29, 2019

Okapia E10 Flash File Spd6531E

Okapia E10 Flash File Spd6531E

Okapia E10 Flash File Spd6531E 1000% Tested 


Okapia E10 Flash File Spd6531E 4MB File